Skip to main content
H3 Generator Works

H3 Generator Works Is A Full Supplier of All Brands of Generators

H3 GENERATOR WORKS was established 12 years ago and has grown tremendously due to practical expertise in the GENERATOR industry. With years of experience, we have established ourselves as market leaders in our field with a reputation of supplying our clients with the best SERVICE and QUALITY GENERATORS.

 

H3 GENERATOR WORKS is a full supplier of all brands of GENERATORS such as Volvo, Perkins, Lovol, FAW etc.  Our alternators are of top-quality brands such as Crompton Greaves, Engga, Weg, Stampford, Sincro as well as other leading brands. Our panels are built by leading panel builders who are Qualified Electrical Engineers.

 

With quality and service being the corner stone of our business at H3 GENERATOR WORKS, you will be sure of being more than just the client, you'll be part of the family! H3 GENERATOR WORKS provides peace of mind to all our clients new and current.

 

H3 GENERATOR WORKS is based in South Africa, but we service the whole of Africa. There are numerous sets supplied by H3 GENERATOR WORKS in operation in Mozambique, Zimbabwe and Namibia.  Supplying power to lodges, factories, restaurants, service stations, construction companies, hospitals and private residences.

As a top supplier of quality branded generators and number one for service, the choice is obvious, H3 GENERATOR WORKS is the only company for your generator needs.

 

OUR SERVICES

We supply quality branded generators for sale to all industries that require power solutions. Our services include, but are not limited, to the following:

  • Diesel Generators Sales
  • Generator Maintenance
  • Generator Installation
  • Ventilation Ducting Installation
  • Diesel Tanks
  • All Types of Generators (Industrial and Domestic)
  • All Relevant Generator Products (AVR, Solenoids, Engine Management, etc.)

 

H3 GENERATOR WORKS - ADDITIONAL SERVICES

  • Site inspection by a qualified and experienced electrician to ascertain the client's needs in terms of the generator size required.
  • Electrical connection and commissioning of the generator by a qualified and experienced electrician.
  • Full ventilation solution installed by qualified personnel.
  • Custom build trailers for mobile Back Up Generators.
  • Service and maintenance contracts to meet the client's individual needs. Qualified personnel supplied.
  • Delivery to and positioning of generator sets on site.

 

 

H3 GENERATOR WORKS – PRODUCTS

Generator Range:

  • FAW DE 10 -165 KVA Standby
  • Lovol 30 - 165 KVA Standby
  • Volvo 75 - 700 KVA Standby
  • John Deere 50 - 450 KVA Standby
  • Cummins 100 - 500 KVA Standby
  • Perkins 15 - 1500 KVA Standby

 

H3 GENERATOR WORKS - IMPORTANT ASPECTS

A generator installation must only be carried out by a professional who is knowledgeable and experienced in this field. Essential criteria for successful installations include:

  • Necessary ventilation.
  • Electrical connections to be carried out by a qualified experienced electrician.
  • Phase balancing is important on a 3-phase unit, as unbalanced phases can cause damage to the Generator.
  • The set must be properly earthed.
  • The unit must be tested on load to ascertain that the set is of sufficient size to take full load.
  • It is important to use the correct, suitably sized cables between the Generator and the main distribution board. Cables that are too light are dangerous and will cause damage.
  • Electrical motor loads are an important part of any installation such as a factory, a garage, a supermarket or restaurant with refrigerators and exhaust fans.  It is absolutely essential that a proper professional assessment be done by a knowledgeable electrician.
  • Electrical motors draw many times the rated running current (amps) to start up. Single phase 230V motors can draw up to seven times more that the running current just to start.
  • Three phase 380V motors also draw substantially more than their rated running current to start up.  The situation also changes according to requirements, from direct online starting too automatic star/delta installations. Motor starting currents are sometimes severe and as a result are critical on electrical motor-driven borehole pumps. The same applies to motors on compressors etc.

 

PTO GENERATORS

  • All PTO Generators are mounted on a 3-point lifting frame and come complete with gear box with a Ratio of 3,49:1, that helps with the low revs on the tractor.  The tractor will run at about 430 rpm.
  • The Metering panel comes with 3 x Amp Meters, 1 x Volt Meter with selector switch to check Voltage between 3 and single phase, a Frequency Meter to make sure you get the alternator turning at the right speed and a Circuit Breaker.
  • The panel is mounted on top of a Lintz Alternator, which is top quality and is manufactured in Italy.

 

 

For other agricultural products and services, click here.

Archived Posts

2024 (1)
2023 (1)
2022 (1)
2021 (1)
2020 (1)
2019 (1)
2018 (1)
2017 (1)
H3 Generator Works | PTO | Generators | Electrical